| Customization: | Available |
|---|---|
| Standard: | DIN, GB, ISO, JIS |
| Type: | Concrete Nail |
|
Still deciding? Get samples of US$ 0/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make at Made-in-china.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Joist hanger nails is used to connect joist hangers to the joists or wood studs they will be supporting. Joist hanger nails are short and heavy gauge nails, providing increased holding power without fully penetrating the wood. They have a high shear strength to resist forces that make a material's internal faces slide parallel past each other. Storms, and high winds can cause shear stress in materials. For these reasons, nails are recommended over screws for installing connectors to the decking framework as screws lack the needed shear strength to resist shear stress.
34 Degree Paper Collated Joist Hanger Nails
Used in the hanging of metal hangers, seismic, anchors and connector straps.
34-degree paper tape collated nail.
Head-stamped for ease of identification.
Full round head.
Electro Galvanized fasteners have a very thin layer of Zinc that offers some corrosion protection.
These nails are manufactured and collated to strict quality standards to ensure optimal performance in any of our varied styles of Metal Connector tools.
| Name | 33 Degree Galvanized Paper Tape 1-1/2 Inch x .131 Inch Joist Hanger Nails |
| Diameter | 3.33mm(0.131"), 3.4mm(0.134"), 3.76mm(0.148") ,4.10mm(0.161") |
| Length | 32mm-64mm |
| Shank | Smooth, Ring ,Screw |
| Coating | Yellow, Red, Blue. |
| Finishing | Zinc Galvanized, Hot DIP Galvanized. Stainless steel 304, Stainless steel 316 |
| Fitting Tools | SENCO, BEA, BOSTICH, HITACHI, OMER, PASLODE etc... |
| OEM Service | OEM Service is available if you provide a drawing or sample. |
| Samples | Samples are free. |
| Customized | Customized is available if you provide a drawing or sample |
Smooth Shank
Smooth shank nails are the most common and are often used for framing and general construction applications. They offer enough holding power for most everyday use.
Ring Shank
Ring shank nails offer superior holding power over smooth shank nails because the wood fills in the crevasse of the rings and also provide friction to help prevent the nail from backing out over time. A ring shank nail is often used in softer types of wood where splitting is not an issue.
Screw Shank
A screw shank nail is generally used in hard woods to prevent the wood from splitting while the fastener is being driven. The fastener spins while being driven (like a screw) which creates a tight groove that makes the fastener less likely to back out.
Annular Thread Shank
Annular thread is very similar to a ring shank except the rings are externally beveled which presses against the wood or sheet rock to prevent the fastener from backing out.
Finishing:
Bright Finish
Bright fasteners have no coating to protect the steel and are susceptible to corrosion if exposed to high humidity or water. They are not recommended for exterior use or in treated lumber, and only for interior applications where no corrosion protection is needed. Bright fasteners are often used for interior framing, trim and finish applications.
Hot Dip Galvanized (HDG)
Hot dip galvanized fasteners are coated with a layer of Zinc to help protect the steel from corroding. Although hot dip galvanized fasteners will corrode over time as the coating wears, they are generally good for the lifetime of the application. Hot dip galvanized fasteners are generally used for outdoor applications where the fastener is exposed to daily weather conditions such as rain and snow. Areas near the coasts where the salt content in rain water is much higher, should consider Stainless Steel fasteners as salt accelerates the deterioration of the galvanization and will accelerate corrosion.
Electro Galvanized (EG)
Electro Galvanized fasteners have a very thin layer of Zinc that offers some corrosion protection. They are generally used in areas where minimal corrosion protection is needed such as bathrooms, kitchens and other areas that are susceptible to some water or humidity. Roofing nails are electro galvanized because they are generally replaced before the fastener begins to wear and are not exposed to harsh weather conditions if installed properly. Areas near the coasts where salt content in rain water is higher should consider a Hot Dip Galvanized or Stainless Steel fastener.
Joist Hangers, Seismic
Foundation Anchors and Connector Straps.
1.Q:Do you have your own production factory?
A:Yes,we not only have our own factory,We also have a cooperative relationship with more than one hundred factories in China
1.Short production time:Our company have established the strong partner-ship with over 100 factories and We have our own factory.
){kind=link}