| Material: | Steel Wire |
|---|---|
| Cross Sectional Shape: | Round |
| Application: | Construction Wire Mesh, Protecting Mesh, Fence Mesh, Decorative Mesh, Gabion Mesh, Window Curtain, Cages |
| Samples: |
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier
Rebar Tie Wire 21 Gauge Black Annealed
Used in Rebar Tying wire for RB392.395,397.
Tie Wire- Diameter: 0.8mm
Large Length- Length of each coil is up to 95m
High Quality- Made of low carbon steel and through heat treatment, durable and stable
Smooth Surface- Its surface is smooth, highly polished and has no burr
| Model No.: | Rebar Tie Wire 21 Gauge Black Annealed |
| Diameter: | 0.8MM |
| Length: | 95M |
| Net weight: | 0.4kg/ reel |
| Material Code: | Q195, Galvanized Wire |
| Applicable machine: | Rebar Tier RB392,395,397 and 213 |
| Wire Tensile Strength | 420m/Pa |
| Wire Yield Strength: | 330m/Pa |
| Resistance against rust: | It should be no rust by 4cycles times under instructed test conditions |
| Tensile Strength: | 42-47 KG/CM2 |
| Elongation: | 21% |
| Wire length for one knot: | 50-40cm.One reel can tie 120 to 190knots |
| Carbon | Mangan | Phosphorus | Sulfur |
| 0.13-0.18% | 0.60-0.90% | less than 0.03% | less than 0.035% |
KYA rebar tie wire is made of the ideal grades of carbon steel and stainless steel to suit the environment they must endure.
The rebar tie wire is drawn and dead soft annealed to create the greatest possible ductility which provides a tough but pliable wire which is easy to twist but hard to break.
BLACK ANNEALED
This low carbon steel, dead soft annealed wire is coated with a black oxide finish to provide a thin, mildly corrosion-resistant finish. This commonly used wire meets most construction, precast, and pre-stressed concrete industry applications.
ELECTRO-GALVANIZED
This low carbon steel, dead soft annealed wire is finished with a 5-micron zinc coating to provide greater corrosion resistance. It is ideal for precast or pre-stressed concrete used in marine or other harsh environment applications, or where length of service is important.
PLASTIC COATED
This low carbon steel, dead soft annealed wire is powder-coated with .05mm thickness of yellow polymer (polyester). It is used when tying epoxy coated rebar or other DOT mandated uses, or anywhere a cushioned wire with added protection against corrosion or abrasives is needed.
1) Precast concrete products,
2) building foundations,
3) road and bridge construction,
4) floors and walls,
5) retaining walls,
6) swimming pool walls,
7) radiant heating tubes,
8) electrical conduits
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}