| Customization: | Available |
|---|---|
| Material: | Steel Wire |
| Cross Sectional Shape: | Round |
|
Still deciding? Get samples of US$ 0/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Model No.: | Rebar Tying Wire Spool for Max Rb 397 398 399 |
| Diameter: | 0.8MM |
| Length: | 95M |
| Net weight: | 0.4kg/ reel |
| Material Code: | Q195, Galvanized Wire |
| Applicable machine: | MAX RB392,395,397 and 213 |
| Wire Tensile Strength | 420m/Pa |
| Wire Yield Strength: | 330m/Pa |
| Resistance against rust: | It should be no rust by 4cycles times under instructed test conditions |
| Tensile Strength: | 42-47 KG/CM2 |
| Elongation: | 21% |
| Wire length for one knot: | 50-40cm.One reel can tie 120 to 190knots |
KYA rebar tie wire is made of the ideal grades of carbon steel and stainless steel to suit the environment they must endure.
The rebar tie wire is drawn and dead soft annealed to create the greatest possible ductility which provides a tough but pliable wire which is easy to twist but hard to break.
BLACK ANNEALED
This low carbon steel, dead soft annealed wire is coated with a black oxide finish to provide a thin, mildly corrosion-resistant finish. This commonly used wire meets most construction, precast, and pre-stressed concrete industry applications.
ELECTRO-GALVANIZED
This low carbon steel, dead soft annealed wire is finished with a 5-micron zinc coating to provide greater corrosion resistance. It is ideal for precast or pre-stressed concrete used in marine or other harsh environment applications, or where length of service is important.
PLASTIC COATED
This low carbon steel, dead soft annealed wire is powder-coated with .05mm thickness of yellow polymer (polyester). It is used when tying epoxy coated rebar or other DOT mandated uses, or anywhere a cushioned wire with added protection against corrosion or abrasives is needed.
){kind=link}