| Customization: | Available |
|---|---|
| Brand: | Kya |
| Condition: | New |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
21 Gauge 1/2 Inch Wide Crown Pneumatic Stapler 8016/420 is a top of the line professional grade pneumatic fine wire stapler. It can be used for interior decorative finishes, automotive vinyl etc.
1. Comfortable rubber grip.
2. Uses same fasteners as BEA 80 and possibly Bostitch and Senco models.
3. Ultra-lightweight at 2.2 lbs.
4. Slim body to easy fit into tight spaces.
5. Quick release magazine for easy loading.
| Name | Air Stapler 8016/420 |
| Weight | 1.0kgs (2.20lbs) |
| Load Capacity | 190 Staples |
| Operating Pressure | 60-100psi(4-7kgs/cm2) |
| Staple Length | 6~16mm(1/4 "~5/8 " ) |
| Crown | 12.8mm(1/2") |
| Staple Thickness | 21 Gauge 0.95x0.65mm(0.037 x0.025in) |
| Customized | Customized is available if you providr a drawing or sample |
| OEM Service | Available |
Features:
Lightweight body for easy operation.
Low noisy have good feedback from suctoerm.
Powerful strength and excellent durability.
Same as 380/16-420
Furniture manke and repair.
Cloth and wood connection.
Picture frams.
Decoration.
| No. | Symptom | Problems | Solutions | |
| 1.1 | Air Leak | Air leak in the cylinder cap when tools don't work | 1.Loose head valve piston seal or o-rings . | Check and replace the head valve piston set |
| 2.Worn or damaged o-ring or cylinder cap gasket under cylinder cap | Check and replace o-ring or cylinder cap gasket under the cylinder cap | |||
| 1.2 | Air leak in Trigger area when tools don't work | 1.Damaged o-ring in trigger valve | Check and replace o-ring | |
| 2.Damaged o-ring in trigger valve stem | Check and replace o-ring | |||
| 3.Dirt in the trigger valve | Check and clean the trigger valve | |||
| 1.3 | Air leak in cylinder cap when tools are working | 1.Damaged head valve piston o-rings | Check and replace o-rings | |
| 2.Damaged seal under cylinder cap | Check and replace seal | |||
| 1.4 | Air leak in nose when tools are working | 1.Worn or damaged bumper | Check and replace bumper | |
| 2.Loose driver(piston unit) thread | Check and replace driver(piston unit) | |||
| 1.5 | Air leak in Trigger area when tools are working | 1.Worn or damaged trigger valve head | Check and replace trigger valve head | |
| 2.Damaged head valve piston o-rings | Check and replace head valve piston o-rings | |||
| 2 | Failed to get driver(piston unit) back to the correct position completely. | 1.The driver(piston unit) is not straight or the driver guide(nose) is wrong assembled. | Straighten the driver(piston unit) or verify driver guide(nose) and magazine | |
| 2.Worn or damaged nozzle | Check and replace nozzle | |||
| 3.The space between piston o-ring and cylinder is too tight. | Check if the cylinder is adequate lubrication or replace the o-ring on the piston. | |||
){kind=link}