Tool Specification:
| MODEL |
CN80 (Aluminum body/Magnesium body) |
| FIRING METHOD |
Contact trip |
| FIRING MODE: |
Bump fire |
| WEIGHT: |
3.98kgs (Aluminum body) 3.68kgs (Magnesium body) |
| DIMENSIONS: |
362 x 132 x 307mm |
| OPERATING PRESSURE: |
5-8.3kgs/cm2 (70-120psi ) |
| Customized |
Customized is available if you provide a drawing or sample |
| OEM Service |
Available |
Nail Specification:
| 15° Flat wire welded coil nails |
| LENGTH: |
50mm - 83 mm |
| SHANK DIAMETER: |
2.5 - 3.3 mm |
| HEAD: |
6.0-8.0mm |
| SHANK TYPE: |
Smooth, ring & screw |
Applications:
Assembly and repair of pallets,drums,export wooden boxes.
Crating
Wooden Fencing
General construction applications including:siding,decking and sheathing
Features:
Ergonomic design, well balanced
Extra heavy-duty, die cast aluminum construction
Big load capacity
Powerful, rapid nailing performance
Comfortable rubber grip
Light weight
Service and Repars:
| No. |
Symptom |
Problems |
Solutions |
| 1.1 |
Air Leak |
Air leak in the cylinder cap when tools don't work |
1.Loose head valve piston seal or o-rings . |
Check and replace the head valve piston set |
| 2.Worn or damaged o-ring or cylinder cap gasket under cylinder cap |
Check and replace o-ring or cylinder cap gasket under the cylinder cap |
| 1.2 |
Air leak in Trigger area when tools don't work |
1.Damaged o-ring in trigger valve |
Check and replace o-ring |
| 2.Damaged o-ring in trigger valve stem |
Check and replace o-ring |
| 3.Dirt in the trigger valve |
Check and clean the trigger valve |
| 1.3 |
Air leak in cylinder cap when tools are working |
1.Damaged head valve piston o-rings |
Check and replace o-rings |
| 2.Damaged seal under cylinder cap |
Check and replace seal |
| 1.4 |
Air leak in nose when tools are working |
1.Worn or damaged bumper |
Check and replace bumper |
| 2.Loose driver(piston unit) thread |
Check and replace driver(piston unit) |
| 1.5 |
Air leak in Trigger area when tools are working |
1.Worn or damaged trigger valve head |
Check and replace trigger valve head |
| 2.Damaged head valve piston o-rings |
Check and replace head valve piston o-rings |
| 2 |
Failed to get driver(piston unit) back to the correct position completely. |
1.The driver(piston unit) is not straight or the driver guide(nose) is wrong assembled. |
Straighten the driver(piston unit) or verify driver guide(nose) and magazine |
| 2.Worn or damaged nozzle |
Check and replace nozzle |
| 3.The space between piston o-ring and cylinder is too tight. |
Check if the cylinder is adequate lubrication or replace the o-ring on the piston. |
| 3 |
Work weakly and sluggishly |
1. Worn or damaged piston o-ring |
Check and replace piston o-ring |
| 2.Inadequate lubrication for head valve piston o-rings or too tight head valve piston o-rings |
Place 2 or 6 drops of oil on o-rings or replace head valve piston o-rings |
| 3.Dirt in the nozzle |
Check and clean the nozzle |
| 4 |
Tool jams frequently |
1.Damaged or Worn driver (piston unit) |
Check and replace driver (piston unit) |
| 2.Damaged or Worn driver guide (nose) |
Check and replace driver guide (nose) |
| 3.Driver guide cover is bent,so the space between driver guide cover and driver guide is too big |
Check and replace driver guide cover |
| 5 |
Nail can not be shot |
1. Driver (piston unit) can't return to the correct position. |
Refer to no. 1 Symptom |
| 2.Driver guide(nose) can not match magazine well |
Check and correct the position between driver guide(nose) and magazine |
| 3.Worn or damaged nail pusher compression spring |
FAQ:
1.Q:Do you have your own production factory?
A:Yes,we not only have our own factory,We also have a cooperative relationship with more than one hundred factories in China
2.Q: Can you send us samples?
A: We are pleased to send you the sample to test the quality and market.
3.Q: About your products, could you do it OEM?
A: Yes, OEM service is available.
4.Q: Do you also provide spare parts of pneumatic tools?
A: Once we confirm the models you'd like to order, we will send you the diagram for checking and also suggest you some easy-broken parts.
5.Q: For the product, could you spray other color of painting?
A: Yes, color can be customized.
6.Q: What's the delivery time?
A: It usually takes about 20-30 working days to produce one order.
7.Q: How is the payment terms?
A: Normally T/T 30% in advance and T/T 70% before shipment.
8.Q: Can I mix different models in one container?
A: Yes, different models can be mixed in one container, but the quantity of each model should not be less than MOQ.
9.Q: How does your factory do regarding quality control?
A: We always pay great attention to quality control from the very beginning and every product was tested piece by piece before delivery.
10.Q: Do you have quality certification?
A: Yes, we have CE, SGS,ISO, ect.
About Us:
Contact Us:
Audited Supplier 
){kind=link}