| Customization: | Available |
|---|---|
| Condition: | New |
| Customized: | Customized |
|
Still deciding? Get samples of US$ 230/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
CN100 Pneumatic Coil Nailer
The CN100 is a professional Powerful coil framing nailer, The CN100 can be used for assembly and repair of pallets,drums,export wooden boxes,wooden fencing,crating,siding,decking and sheathing etc.
Coils nails 64mm,75mm,85mm,90mm, 100mm.
Includes auxiliary handle to make firing more comfortable.
Compact nose makes firing of coil nails easier in construction applications.
High steel frame bracket for ultimate stiffness and rigidity.
Rubber comfort grip reduces operator fatigue.
The CN100 coil nailer is ideal for pallets and crates.
Protective guard prevents flying dust and debris.
| Name | Coil Nailer |
| Specification | CN100 |
| Weight | 5.35kgs |
| Load Capacity | 150-300PCS nails |
| Operating Pressure | 70-120psi(5-8.3kgs/cm2) |
| Fasteners | 15° Flat wire welded coil nails |
| Fasteners Length | 65mm-100mm |
| Shank | 2.5mm-3.33mm |
| Nails Head | 6.5mm-7.5mm |
| Nail Pitch | 8.0mm |
| Customized | Customized is available if you provide a sample or drawing |
| OEM Service | Available |
15 Degree Flat wire coil nails
Fasteners Head Diameter:0.256"(6.5mm)-0.295"(7.5mm)
Fasteners Shank Diameter:0.099"(2.5mm)-0.131"(3.3mm)
Fasteners Length:2-1/2"(65mm)-4"(100mm)
Fasteners Shank Type:Smooth,Screw,Ring
1. Most powerful tool in its class, able to countersink nails into hard oak pallet.
2. Durable aluminum frame and cylinder cap.
3. Well balanced when hung on balancer.
4. Down wards directional exhaust.
5. Built in silencer to reduce noise level.
6. Comfortable rubber grip.
7. Big magazine allows extra nail capacity.
1.Making pallets and crates.
2.Decking.
3.Framing.
4.Export boxes packing.
5.Hard wooden boards.
6.Window trim.
7.Cabinet framing.
8.Floor boards.
9.Wall framing.
10.Sheathing.
11.Siding and so on.
Service and Repairs:
| No. | Symptom | Problems | Solutions | |
| 1.1 | Air Leak | Air leak in the cylinder cap when tools don't work | 1.Loose head valve piston seal or o-rings . | Check and replace the head valve piston set |
| 2.Worn or damaged o-ring or cylinder cap gasket under cylinder cap | Check and replace o-ring or cylinder cap gasket under the cylinder cap | |||
| 1.2 | Air leak in Trigger area when tools don't work | 1.Damaged o-ring in trigger valve | Check and replace o-ring | |
| 2.Damaged o-ring in trigger valve stem | Check and replace o-ring | |||
| 3.Dirt in the trigger valve | Check and clean the trigger valve | |||
| 1.3 | Air leak in cylinder cap when tools are working | 1.Damaged head valve piston o-rings | Check and replace o-rings | |
| 2.Damaged seal under cylinder cap | Check and replace seal | |||
| 1.4 | Air leak in nose when tools are working | 1.Worn or damaged bumper | Check and replace bumper | |
| 2.Loose driver(piston unit) thread | Check and replace driver(piston unit) | |||
| 1.5 | Air leak in Trigger area when tools are working | 1.Worn or damaged trigger valve head | Check and replace trigger valve head | |
| 2.Damaged head valve piston o-rings | Check and replace head valve piston o-rings | |||
| 2 | Failed to get driver(piston unit) back to the correct position completely. | 1.The driver(piston unit) is not straight or the driver guide(nose) is wrong assembled. | Straighten the driver(piston unit) or verify driver guide(nose) and magazine | |
| 2.Worn or damaged nozzle | Check and replace nozzle | |||
| 3.The space between piston o-ring and cylinder is too tight. | Check if the cylinder is adequate lubrication or replace the o-ring on the piston. | |||
| 3 | Work weakly and sluggishly | 1. Worn or damaged piston o-ring | Check and replace piston o-ring | |
| 2.Inadequate lubrication for head valve piston o-rings or too tight head valve piston o-rings | Place 2 or 6 drops of oil on o-rings or replace head valve piston o-rings | |||
| 3.Dirt in the nozzle | Check and clean the nozzle | |||
| 4 | Tool jams frequently | 1.Damaged or Worn driver (piston unit) | Check and replace driver (piston unit) | |
| 2.Damaged or Worn driver guide (nose) | Check and replace driver guide (nose) | |||
| 3.Driver guide cover is bent,so the space between driver guide cover and driver guide is too big | Check and replace driver guide cover | |||
| 5 | Nail can not be shot | 1. Driver (piston unit) can't return to the correct position. | Refer to no. 1 Symptom | |
| 2.Driver guide(nose) can not match magazine well | Check and correct the position between driver guide(nose) and magazine | |||
| 3.Worn or damaged nail pusher compression spring | Check and replace nail pusher compression spring | |||
1.Q:Do you have your own production factory?
A:Yes,we not only have our own factory,We also have a cooperative relationship with more than one hundred factories in China
){kind=link}