| Customization: | Available |
|---|---|
| Condition: | New |
| Customized: | Customized |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Product Overview:
CN70 Pneumatic Coil Siding Nailer
The CN70 is a professional grade pneumatic siding nailer. This nailer is ideal for nailing in large quantities. The fasteners used are 15° wire collated coil nails. The depth of drive guide allows the user to adjust on the site.
1.Lightweight aluminum design for added durability
2. Adjustable depth guide sets nails to desired depths quickly and conveniently.
3. Dial adjustable depth control allows depth adjustment with no special tool.
4. Drives 225-300 nails continuously by full-loading.
5. Powerful, Rapid Nailing Performance; Ergonomic Design, Well Balanced.
6. High durability river and bumper for long life.
7. Extra heavy-duty: Die cast aluminum construction.
8.Similar Tool:MAX CN70 Coil Siding Nailer, Bostitch N70CB Coil Nailer.
| Model: | CN70 Pneumatic Coil Siding Nailer |
| Air Tool Type: | Air Nailer |
| Tool Diamensions: | 315mmx128mmx306mm(12-7/16"x5"x12-1/16") |
| Net Tool Weight: | 3.67kgs(8.07lbs) |
| Body Material: | Aluminum Body |
| Operate Pressure: | 70-120psi(5-8.3bar) |
| Load Capacity: | 225-300 Nails |
| Fasteners Type: | 15 Degree Flat wire coil nails |
| Fasteners Head Diameter: | 0.197"(5.0mm)-0.276"(7.0mm) |
| Fasteners Shank Diameter: | 0.091"(2.3mm)-0.113"(2.9mm) |
| Fasteners Length: | 1-3/4"(45mm)-2-3/4"(70mm) |
| Fasteners Shank Type: | Smooth,Screw,Ring |
| 15° Flat wire welded coil nails | |
| LENGTH: | 45 - 70 mm |
| SHANK DIAMETER: | 2.3 - 2.9 mm |
| HEAD: | 5.0-7.0mm |
| SPACING: | 8mm |
| SHANK TYPE: | Smooth, ring & screw |
| Packaging Details: | According to your requirements |
| Delivery Detail: | 7~30 days as per your quantity |
| No. | Symptom | Problems | Solutions | |
| 1.1 | Air Leak | Air leak in the cylinder cap when tools don't work | 1.Loose head valve piston seal or o-rings . | Check and replace the head valve piston set |
| 2.Worn or damaged o-ring or cylinder cap gasket under cylinder cap | Check and replace o-ring or cylinder cap gasket under the cylinder cap | |||
| 1.2 | Air leak in Trigger area when tools don't work | 1.Damaged o-ring in trigger valve | Check and replace o-ring | |
| 2.Damaged o-ring in trigger valve stem | Check and replace o-ring | |||
| 3.Dirt in the trigger valve | Check and clean the trigger valve | |||
| 1.3 | Air leak in cylinder cap when tools are working | 1.Damaged head valve piston o-rings | Check and replace o-rings | |
| 2.Damaged seal under cylinder cap | Check and replace seal | |||
| 1.4 | Air leak in nose when tools are working | 1.Worn or damaged bumper | Check and replace bumper | |
| 2.Loose driver(piston unit) thread | Check and replace driver(piston unit) | |||
| 1.5 | Air leak in Trigger area when tools are working | 1.Worn or damaged trigger valve head | Check and replace trigger valve head | |
| 2.Damaged head valve piston o-rings | Check and replace head valve piston o-rings | |||
| 2 | Failed to get driver(piston unit) back to the correct position completely. | 1.The driver(piston unit) is not straight or the driver guide(nose) is wrong assembled. | Straighten the driver(piston unit) or verify driver guide(nose) and magazine | |
| 2.Worn or damaged nozzle | Check and replace nozzle | |||
| 3.The space between piston o-ring and cylinder is too tight. | Check if the cylinder is adequate lubrication or replace the o-ring on the piston. | |||
| 3 | Work weakly and sluggishly | 1. Worn or damaged piston o-ring | Check and replace piston o-ring | |
| 2.Inadequate lubrication for head valve piston o-rings or too tight head valve piston o-rings | Place 2 or 6 drops of oil on o-rings or replace head valve piston o-rings | |||
| 3.Dirt in the nozzle | Check and clean the nozzle | |||
| 4 | Tool jams frequently | 1.Damaged or Worn driver (piston unit) | Check and replace driver (piston unit) | |
| 2.Damaged or Worn driver guide (nose) | Check and replace driver guide (nose) | |||
| 3.Driver guide cover is bent,so the space between driver guide cover and driver guide is too big | Check and replace driver guide cover | |||
| 5 | Nail can not be shot | 1. Driver (piston unit) can't return to the correct position. | Refer to no. 1 Symptom | |
| 2.Driver guide(nose) can not match magazine well | Check and correct the position between driver guide(nose) and magazine | |||
| 3.Worn or damaged nail pusher compression spring | Check and replace nail pusher compression spring | |||
){kind=link}