| Customization: | Available |
|---|---|
| Material: | Steel Wire |
| Cross Sectional Shape: | Round |
|
Still deciding? Get samples of US$ 0/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
21 Ga Tie Wire Coils for Rebar Tying Machine
High precision galvanised steel tie wire
Tie wire diameter - 0.8mm
Comes in carton of 50 coils (100m per coil)
Superior quality tie wire for prolonged life
Galvanised Steel or 304 Stainless Steel.Tire Wire Coils available
Designed for use with Rebar Tiers.
Each spool of wire makes it fast and easy to load your automatic rebar tier
Includes 50 spools, each containing 325 feet of wire, equivalent to approximately 120 single ties.
| Model No.: | 21 Gauge Black Annealed Concrete Tie Wire |
| Diameter: | 0.8MM |
| Length: | 95M |
| Net weight: | 0.4kg/ reel |
| Material Code: | Q195, Galvanized Wire |
| Applicable machine: | Rebar Tier RB392,395,397 and 213 |
| Wire Tensile Strength | 420m/Pa |
| Wire Yield Strength: | 330m/Pa |
| Resistance against rust: | It should be no rust by 4cycles times under instructed test conditions |
| Tensile Strength: | 42-47 KG/CM2 |
| Elongation: | 21% |
| Wire length for one knot: | 50-40cm.One reel can tie 120 to 190knots |
| Carbon | Mangan | Phosphorus | Sulfur |
| 0.13-0.18% | 0.60-0.90% | less than 0.03% | less than 0.035% |
KYA rebar tie wire is made of the ideal grades of carbon steel and stainless steel to suit the environment they must endure.
The rebar tie wire is drawn and dead soft annealed to create the greatest possible ductility which provides a tough but pliable wire which is easy to twist but hard to break.
BLACK ANNEALED
This low carbon steel, dead soft annealed wire is coated with a black oxide finish to provide a thin, mildly corrosion-resistant finish. This commonly used wire meets most construction, precast, and pre-stressed concrete industry applications.
ELECTRO-GALVANIZED
This low carbon steel, dead soft annealed wire is finished with a 5-micron zinc coating to provide greater corrosion resistance. It is ideal for precast or pre-stressed concrete used in marine or other harsh environment applications, or where length of service is important.
PLASTIC COATED
This low carbon steel, dead soft annealed wire is powder-coated with .05mm thickness of yellow polymer (polyester). It is used when tying epoxy coated rebar or other DOT mandated uses, or anywhere a cushioned wire with added protection against corrosion or abrasives is needed.
1) Precast concrete products,
2) building foundations,
3) road and bridge construction,
4) floors and walls,
5) retaining walls,
6) swimming pool walls,
7) radiant heating tubes,
8) electrical conduits
){kind=link}