| Customized: | Customized |
|---|---|
| Color: | Black |
| Material: | Plastic |
| Model No. | KYA-400B |
| Max Tying Diameter | 6mm-45mm |
| Voltage & Capacity | DC14.4V(4.4AH) |
| Charge Time | Approx.70mins |
| Tying speed per knot | 0.75 seconds |
| Ties per Charge | Over 2700knots |
| Ties per Coil | Approx. 130ties(3turns) |
| Turns per Tie | 2turns/3turns |
| Length of Wire for Tying | 650mm/2 turns |
| 750mm/3 turns | |
| Wire Type | Black annealed wire or Galvanized wire |
| Net Weight | 1.9kgs |
| Dimension(L)X(W)X(H) | 295mmX120mmX275mm |
One set including:
. 1Pc Rebar tier machine
. 2Pc Battery pack
. 1Pc Quick charger
. 3Pcs of steel wire rolls
. 1PcSpecification
. 1pc of Inner Hexagon Spanner
. 1pc of Sharp Nose Pliers
Packing Size: 45×34×13cm
GW of one set: 7kg
| Battery | ||
| Model | WL-4SX(Li-ion) | |
| Voltage & Capacity | DC 14.4V(4.4Ah) | |
| Charge Time | Approx. 50 minutes | |
| Dimension(L)X(W)X(H) | 95mm*75mm*100mm | |
| Net Weight | 480g | |
| Charger | ||
| Model | WL-4A | |
| Charger Voltage | 110V-240V | |
| Frequency | 50/60HZ | |
| Dimension(L)X(W)X(H) | 165mm*115*60mm | |
| Net Weight | 490g | |
Max TW1061T Rebar Tie Wire for RB441T and RB611T Twintier
Regular Black Annealed steel tie wire for MAX Rebar tiers. 19 gauge, Approx. 145 to 265 ties per roll. Fits model RB441T and RB611T. Each case contains 50 rolls of tie wire.
Applications Include:
Precast concrete products, Building foundation, Road and bridge construction, Floors and walls, Radiant heating tubes, Retaining walls, Swimming pool walls, Electrical conduits.
The tw1061t wire reel minimum order quantity is 2400pcs(Packed in wooden cases one CBM).
We have three kinds of wire,1.0mm 19 Gauge
TW1061T Regular black annealed tie wire,
TW1061T-EG galvanized tie wire,
TW1061T-PC Poly Coated tie wire.
Wire Coil Parameters
(19 Gauge 1.0mm Black annealed wire or Galvanized wire*2pcs)
Model: TW1061T,TW1061T-EG
Diameter: 1.0mm
Material: Q195
Length: 33meters
KYA rebar tie wire is made of the ideal grades of carbon steel and stainless steel to suit the environment they must endure.
The rebar tie wire is drawn and dead soft annealed to create the greatest possible ductility which provides a tough but pliable wire which is easy to twist but hard to break.
BLACK ANNEALED
This low carbon steel, dead soft annealed wire is coated with a black oxide finish to provide a thin, mildly corrosion-resistant finish. This commonly used wire meets most construction, precast, and pre-stressed concrete industry applications.
ELECTRO-GALVANIZED
This low carbon steel, dead soft annealed wire is finished with a 5-micron zinc coating to provide greater corrosion resistance. It is ideal for precast or pre-stressed concrete used in marine or other harsh environment applications, or where length of service is important.
PLASTIC COATED
This low carbon steel, dead soft annealed wire is powder-coated with .05mm thickness of yellow polymer (polyester). It is used when tying epoxy coated rebar or other DOT mandated uses, or anywhere a cushioned wire with added protection against corrosion or abrasives is needed.
