| Customization: | Available |
|---|---|
| Material: | Steel Wire |
| Cross Sectional Shape: | Round |
|
Still deciding? Get samples of US$ 0/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
19 Gauge Galvanized Rebar Tier Wire For Max RB441T
TW1061T is used exclusively for tying rebar with a MAX TwinTier RB441T.
Double the speed, Cost savings, shorter tie Height, save time and tying wire length.
Wire length: 33-34m double wire.
Wire diameter: 1.0mm.
Weight per roll: 0.45 kgs.
Ties per Coil: 170-260
It is ideal for precast or pre-stressed concrete used in marine or other harsh environment applications
| Model No.: | 19 Gauge Galvainzed Rebar Tier Wire For Max RB441T |
| Diameter: | 1.0MM |
| Length: | 33-34m double wire. |
| Net weight: | 0.45kg/ reel |
| Material Code: | Galvanized Wire, Black Annealed Wire,olyester Coated Wire |
| Applicable machine: | Max RB441T. |
| Wraps per Tie: | 1 |
| Tensile Strength: | 55,800-81,300(lb/in²) |
| Carbon | Mangan | Phosphorus | Sulfur |
| 0.13-0.18% | 0.60-0.90% | less than 0.03% | less than 0.035% |
KYA rebar tie wire is made of the ideal grades of carbon steel and stainless steel to suit the environment they must endure.
The rebar tie wire is drawn and dead soft annealed to create the greatest possible ductility which provides a tough but pliable wire which is easy to twist but hard to break.
BLACK ANNEALED
This low carbon steel, dead soft annealed wire is coated with a black oxide finish to provide a thin, mildly corrosion-resistant finish. This commonly used wire meets most construction, precast, and pre-stressed concrete industry applications.
ELECTRO-GALVANIZED
This low carbon steel, dead soft annealed wire is finished with a 5-micron zinc coating to provide greater corrosion resistance. It is ideal for precast or pre-stressed concrete used in marine or other harsh environment applications, or where length of service is important.
PLASTIC COATED
This low carbon steel, dead soft annealed wire is powder-coated with .05mm thickness of yellow polymer (polyester). It is used when tying epoxy coated rebar or other DOT mandated uses, or anywhere a cushioned wire with added protection against corrosion or abrasives is needed.
1) Precast concrete products,
2) building foundations,
3) road and bridge construction,
4) floors and walls,
5) retaining walls,
6) swimming pool walls,
7) radiant heating tubes,
8) electrical conduits
){kind=link}