Kya-890 Automatic Electric Rebar Tying Machine

• Customized: Customized
• Color: Black
• Material: Plastic
• Brand: Kya
• Certification: CE, GS
• Air Tool Type: 8-34mm
• Model NO.: KYA-890
• Capacity: DC12.8V(4.4ah)
• Charge Time: 90min
• Tying Length: 300-500mm
• Tying Speed Per Knot: 0.8 Seconds
• Wire Coil Length: 110m
• Diameter: 0.8mm
• Wraps: 2 Wraps
• Transport Package: Carton
• Trademark: KYA
• Origin: China
• HS Code: 8467299000
• Production Capacity: 600 PCS/Month

Product Description

Overview:

KYA-890 Automatic Electric Rebar Tying Machine

 

KYA-890 Automatic Electric Rebar Tier Machine is a hand held machine used to pack rebars quickly, It can save 3-5 times than man power by hand.Reasonable structure, advanced craft, simple and convenient operation, high efficiency and convenient maintenance.The Tying Machine is used for building market, including civil building, floor pipe, heating floor mesh, steel bar, etc.

Lightweight and compact body.

ne and half hour fast charging.

Modular components,easier maintenance

Reduced tying time.

Product description:
 

Model:	KYA-890 Automatic Electric Rebar Tying Machine
Air Tool Type:	Rebar Tier
Tying Rebar Diameter:	8-34mm
Voltage & Capacity:	DC12.8V(4.4AH)
Charge Time:	Approx.90mins
Tying Speed Per Knot:	0.80 seconds
Ties Per Charge:	Over 3000knots
Tying length/knot:	300-500mm
Length Of Wire Coil:	110M
Diamater Of Wire:	0.80mm
Wraps Per Tie:	2 wraps

Rebar Tying Wire 0.8mm

Length:0.8mm/0.03in

Material: low carbon steel tie wire have been heat treated, it is durable, flexible, anti-corrosion, anti-oxidation.

Smooth Surface:The surface of this tire wire is smooth, highly polished and has no burr.

Applicable Scope:Applicable scope of steel strapping: 6-24mm,6-25mm,8-34mm,9-28mm,20-45mm,30-58mm,30-60mm.

Reasonable Size:Each coil of tire wire is 110m/360ft long and its diameter is 0.8mm/0.03in.

Features:

Ergonomic rubberized soft handle for increased comfort.

Make ties in under 1 second 2-mode operation provides 2 or 3 wraps. 

Fast and easy-load wire reel loading with protective cover.

Brushless Motor eliminates carbon brushes, enabling run cooler , efficiently for longer life.

Delivers up to 130 ties per wire reel allowing for maximum productivity.

Trigger power switch with lock-off feature requires two actions to power the tool.

Ergonomic rubberized soft handle for increased comfort Weighs only 4.19 lbs.

With battery for reduced operator fatigue.

Apply:

Delivered a cordless tying solution for rebar and steel rod.

Product Manual:
 

No	Normal	Common   faults		Warning   voice		Possible   reason		Inspecting   items			Solution
1	Power ON→ The Tip     Axis is initialized     and the wire-cutter     operates     automatically.	No operation   takes     place		No sound   emitted		Battery   completely empty		Confirm   the battery is charged.			Perform   normal charge.
						Electrode plate has been oxidized		Take   out the battery and see if the     electrode has been brown.			Polish   terminal part of battery pack with dry cloth, etc
				Continuous short beeps(Pi,pi,pi…)		Curl   guide is open		Open/close   curl guide.			Fully   close curl guide.
						Binding wire has been entangled around Twist section.		Turn   off power and take out the battery to confirm if binding wire has been   entangled inside curl guide.			Turn   off power, remove binding wire inside curl guide
				Two long beeps		Battery   Is empty		Confirm   the battery is charged			Perform   normal charge
2	Trigger ON→     Wire is sent out.	No wire is sent out		Continuous short		Curl guide is open		Open/close curl guide			Fully close curl guide
				Three   short beeps     repeated(Pi,pi,pi,Pi,pi,pi,     …)		Tie-wire has been run out		Check if the Tie-wire has been run			Set the new tie wire
						Wire caught inside reel		Check if wire inside reel has been loosened and   caught			Remove fray on reel
						Cutter section is blocked with   foreign substance		Confirm functioning of Cutter section			Either wipe Cutter section with dry cloth or   blow it with air
						A wire is caught in the cutter   section or Wire guide A		Check if any wire is caught.			Diassemble the cutter section and remove the   caught wire
3	Binding   wire draws a circle.	Curl is disordered and steps out of curl		No sound emitted		Wire, by hitting reinforcing bars, was repelled		check if wire hits reinforcing bars at binding			Pay attention so that wire does not hit   reinforcing bars at binding
4	Wire   is subject to     cutting	No wire cutting takes     place.		No sound emitted		Cutter section is blocked with foreign     substance		Confirm function of Cutter section.			Either wipe Cutter section with dry cloth or   blow it with air
5	Wire twisting     takes place	Wire gets     entangled		No sound emitted		Wire, by hitting reinforcing bars,was repelled		Check if wire hits reinforcing bars at binding			Pay attention so that wire does not hit   reinforcing bars at binding.
		Binding   power is week		No sound emitted		Reinforcing bars is not of designated size.		Confirm size of reinforcing bars to be bound			Use approriate diameter scope
						Erroneous handling such as   improper application of machine		Confirm how to apply machine to reinforcing   bars			Adjust the Torque to a higher lever and insert   in vertical direction. Use as tilting at45°
		Twisting-off   takes     place		No sound emitted		Reinforcing bars is not of     designated size		Confirm size of reinforcing bars to be bound			Use approriate diameter scope
						Erroneous handling such as   improper application of machine		Confirm how to apply machine to   reinforcing     bars			Adjust the Torque to a lower lever and insert   in vertical direction. Use as tilting at45°
		Works   properly		Two long beeps repeated(Pi-pi, pi-pi,...)		Low power remains in the battery pack		Confirm the battery is fully charged.			Perform normal charge
				Four short beeps   repeated(Pipipipi,     Pipipipi,…)		The tool is used at high temperature.		Check the temperature at the job site.			Leave the tool and the battery pack at normal   temperature in the room for some time. and then continue the operation.

FAQ:

1.Q:Do you have your own production factory?
   A:Yes,we not only have our own factory,We also have a cooperative relationship with more than one hundred factories in China

2.Q: Can you send us samples?
   A: We are pleased to send you the sample to test the quality and market.
 
3.Q: About your products, could you do it OEM?
   A: Yes, OEM service is available.
 
4.Q: Do you also provide spare parts of pneumatic tools? 
    A: Once we confirm the models you'd like to order, we will send you the diagram for checking and also suggest you some easy-broken parts.
 
5.Q: For the product, could you spray other color of painting?
    A: Yes, color can be customized.
 
6.Q: What's the delivery time?
    A: It usually takes about 20-30 working days to produce one order.
 
7.Q: How is the payment terms?
    A: Normally T/T 30% in advance and T/T 70% before shipment.
 
8.Q: Can I mix different models in one container?
    A: Yes, different models can be mixed in one container, but the quantity of each model should not be less than MOQ.
   
9.Q: How does your factory do regarding quality control?
      A: We always pay great attention to quality control from the very beginning and every product was tested piece by piece before delivery.
 
10.Q: Do you have quality certification?
      A: Yes, we have CE, SGS,ISO, ect.
About US:

Why choose KYA?

1.Short production time:Our company have established the strong partner-ship with over 100 factories and We have our own factory.
 
2. No business too small: The most abundant models can be found here and we can share you with advanced and accurate information and resource.

3.Reasonable prices and High quality:Quality and prices are our focus because we know what you will care at most.

4.Satisfactory after-sales service: Middle time production report with photos will be sent to you and also reconfirm accomplished date. We will establish close contact with you.Any problem you will get reply at the first time.
 
5.Free samples: Free samples available at any time.

You can get competitive prices from us because we possess big manufacturing relationship in China.